MAXKOSKO Heavy Duty Gutter Heat Trace Cable, 8W/ft, Self-Regulating Roof Protection (6ft Cord)
7 in stock
Couldn't load pickup availability
Payment Reminder
- Our website accepts Visa, MasterCard, and American Express. If you are using a card issued by another bank, please ensure it is enabled for international transactions.
- During payment, you may be required to complete 3D Secure (3DS) verification. Please ensure that the cardholder completes the verification to avoid payment failure.
- If your usual spending amounts are relatively low and you are making a larger purchase, your bank may flag the transaction as a potential risk. If your payment fails, please contact your bank to approve the transaction.
Description
120V Self-Regulating Roof & Gutter De-Icing Cable
MAXKOSKO Preassembled Roof & Gutter De-Icing Cable helps maintain a drainage path for melting snow and ice along roof edges, gutters, and downspouts, reducing conditions that can contribute to ice dams.
The self-regulating heating cable automatically adjusts its heat output according to the surrounding temperature. Each fixed-length cable includes a 6 ft power cord and lighted plug for connection to a suitable 120V ground-fault-protected outlet.
Your selected cable length refers to the heating cable section only. The additional 6 ft power cord is not deducted from the selected heating length.
Self-Regulating Heat Output
Produces more heat in colder conditions and reduces output as the surrounding temperature becomes warmer.
Preassembled 120V Cable
Supplied as a fixed-length heating cable with an attached 6 ft power cord and lighted plug.
Roof Edge Protection
Creates a meltwater path across the roof overhang to help reduce ice buildup near the eaves.
Gutter & Downspout Use
Can be routed through compatible gutters and downspouts to help maintain continuous drainage.
Multiple Roof Types
Suitable for many standard roofing systems, including compatible shingle and standing seam metal roofs.
Residential & Light Commercial
Designed for roof and gutter de-icing applications on homes, garages, cabins, and similar buildings.
Important Before Ordering
Calculate the Complete Cable Route
Do Not Order by Roof Width Alone: Total cable length must include the roof-edge pattern, roof extension, gutters, downspouts, valleys, and any required return runs.
Fixed-Length Cable: Select the correct preassembled length before ordering. Do not cut, shorten, splice, or repair the heating cable.
Accessories Sold Separately: Roof clips, downspout hangers, UV-resistant cable ties, controller, and ground-fault-protected outlet are not included unless specifically stated in the selected package.
Not a Snow-Melting System: This cable is designed to maintain a drainage path for meltwater. It will not remove accumulated snow from the roof or prevent snow and ice from falling.
Self-Regulating Does Not Mean Automatic Shutoff: The cable reduces its output as temperatures rise but may continue consuming power. A compatible roof de-icing controller is recommended for automatic and more energy-efficient operation.
GFCI Protection Required: Connect the cable only to a properly grounded, weather-protected 120V outlet with code-compliant ground-fault protection.
Accessible Outdoor Installation: Install only on accessible roof, gutter, and downspout surfaces. Do not place the cable beneath roofing materials or conceal it inside walls, ceilings, or floors.
What Is Included & Sold Separately
Included
One preassembled self-regulating roof and gutter heating cable with a 6 ft power cord, lighted plug, and installation manual.
Roof Clips
Sold separately. The manual recommends approximately 10 compatible roof clips for every 7 linear feet of roof edge.
Downspout Hangers
Sold separately. Use one hanger for each downspout, or two when the cable is looped down and back up.
Additional Requirements
UV-resistant cable ties, suitable roof-specific attachment hardware, and a ground-fault-protected electrical outlet may also be required.
Specifications
| Product Type | Preassembled Self-Regulating Roof & Gutter De-Icing Cable |
| Rated Voltage | 120V AC |
| Heating Technology | Self-Regulating Heating Cable |
| Power Cord Length | 6 ft |
| Plug | Lighted Plug |
| Primary Applications | Roof Edges, Gutters, Downspouts and Roof Valleys |
| Compatible Roof Types | Compatible Shingle, Shake and Standing Seam Metal Roof Systems |
| Minimum Installation Temperature | -4°F (-20°C) |
| Installation Location | Exposed and Accessible Outdoor Roof and Drainage Surfaces |
| Required Electrical Protection | Properly Grounded 120V GFCI-Protected Outlet |
| Cable Length | Selected Length Refers to the Heating Section; 6 ft Power Cord Is Additional |
| Accessories | Roof Clips, Downspout Hangers, Cable Ties and Controller Sold Separately |
How Much Heating Cable Do You Need? View Guide Hide Guide
Calculate the complete route before selecting a cable length. The required cable is generally the total of the following sections:
| A. Roof Edge Pattern | Roof-edge length multiplied by the required cable-per-foot factor for the roof style and eave overhang |
| B. Roof Extension | Approximately 0.5 times the roof-edge length when the cable must extend beyond the roof edge |
| C. Gutter | Total gutter length; wide gutters may require two parallel cable runs |
| D. Downspouts | Total downspout length plus approximately 1 ft; double this amount when looping the cable down and back up |
| Roof Valleys | Additional cable may be required to run approximately two-thirds of the way up and back down each valley |
Length Selection Notes
Choose Enough Cable for the Full Route: Include every roof loop, gutter section, downspout, valley, and return path in your calculation.
Do Not Purchase Excess Cable: The fixed-length heating section cannot be shortened or left coiled during operation.
Wide Gutters: Gutters approximately 5–6 inches wide may require two heating cable runs.
Middle Downspouts: When a downspout is located in the middle of the route, calculate enough cable to travel down and return back up.
Refer to the complete installation manual for roof-style spacing tables and detailed length calculations before placing your order.
Recommended Applications
- Roof-edge ice dam prevention systems
- Asphalt shingle and compatible shake roofs
- Compatible standing seam metal roofs
- Metal and plastic gutters
- Metal and plastic downspouts
- Roof valleys where meltwater must be directed toward the gutter
- Residential and light commercial roof drainage systems
Basic Installation Requirements View Requirements Hide Requirements
- Clean leaves and debris from the roof, gutters, and downspouts before installation.
- Plan the entire cable route before attaching the cable.
- Create a looped pattern along the roof overhang so meltwater can reach the gutter.
- Route the cable continuously through gutters and downspouts where drainage protection is required.
- Use compatible roof clips and downspout hangers rather than staples or unapproved fasteners.
- Form a drip loop in the power cord and keep the plug connection protected from water.
- Protect the cable from ladders, sliding snow, sharp edges, and other mechanical damage.
- Inspect and test the complete system before each winter season.
Do Not Damage the Cable
No Staples or Improvised Fasteners: Use only suitable roof cable attachment hardware that will not crush, pierce, or sharply bend the cable.
Do Not Energize a Damaged Cable: If the cable is cut, crushed, burned, or otherwise damaged, discontinue use and replace the complete cable.
Read the Manual: Roof layout, clip type, spacing, gutter routing, and downspout installation depend on the roof structure. Review the complete installation manual before beginning.
Frequently Asked Questions
Does this cable melt all the snow on my roof?
No. The cable is designed to create a drainage path for melting snow and ice. It does not remove accumulated roof snow or prevent snow and ice from falling from the roof.
Are roof clips and downspout hangers included?
No. The preassembled heating cable and installation manual are included. Roof clips, downspout hangers, UV-resistant ties, and other installation accessories are sold separately unless specifically stated in the package.
Does the selected length include the power cord?
No. The selected product length refers to the heating cable section. The attached 6 ft power cord provides additional reach and is not deducted from the heating length.
Can I cut the cable if it is too long?
No. Select the correct fixed-length cable before ordering. Do not cut, shorten, splice, overlap, or repair the heating section.
Does self-regulating cable turn itself completely off?
Not necessarily. Self-regulating cable automatically changes its heat output as temperatures change, but it may continue drawing power in warmer conditions. A compatible automatic controller is recommended for more efficient operation.
Can the cable be installed in the gutter and downspout?
Yes. It can be routed through compatible gutters and downspouts to help maintain a continuous meltwater drainage path. Use suitable hangers and strain relief at downspout openings.
Can I install it beneath shingles or other roof covering?
No. Install the cable only on exposed and accessible roof, gutter, and downspout surfaces. Do not conceal it beneath roofing materials or inside walls, ceilings, or floors.
What electrical outlet is required?
Use a properly grounded, weather-protected 120V outlet with code-compliant ground-fault protection.
Can this cable be installed on a metal roof?
It can be used on compatible standing seam metal roofs when installed with attachment hardware suitable for that roof type. Review the manual and roof manufacturer requirements before installation.
Guides & Resources
Plan the Complete De-Icing System Before Ordering
- Measure the roof edge and eave overhang.
- Add all gutter, downspout, valley, and return-run lengths.
- Select a fixed-length cable that fits the complete route.
- Calculate the required number of roof clips and downspout hangers.
- Confirm a suitable 120V GFCI-protected outlet is available.
- Consider an automatic controller to reduce unnecessary operation.
- Review the complete installation manual before purchasing or installing the cable.
Questions & Answers
Have a Question?
-
How do I estimate the roof and gutter decing cable length needed?
The required cable length for deicing depends on the size and configuration of the roof, including gutter, downspouts, valleys, and dormers. For accurate measurements, please contact us at MAXKOSKO@MAXKOSKO.com. Alternatively, you can measure the dimensions of these areas and consult the installation manual to estimate the necessary cable length.
-
Do you need to wrap the cable in insulation in very cold climates? And if so, what type of insulation is good to use?
No need to wrap the cable in any insulation. That would limit the heating action.