Pipe heating solutions
Pipe heating products
Compare in-pipe, on-pipe and fitting options by application and power.
1. In-pipe heating cables
Installed inside water and waste lines.
| Product | Best for | Pipe / application | Power & heat | Why choose it |
|---|---|---|---|---|
| Pressurized water lines where exterior freeze protection is impractical; safe for potable-water use. | 3/4 in and larger; up to 230 PSI. | 120V AC Approx. 3W/ft; GFCI. |
|
|
| Pressurized water lines where exterior freeze protection is impractical; safe for potable-water use. | 3/4 in and larger; 17 mm minimum route; up to 230 PSI. | 120V or 240V Approx. 3W/ft at 50°F; GFCI. |
|
|
| Low-pressure water, sewer, septic, sump and wastewater lines. | Low-pressure water and non-potable lines, typically 2 in and larger. | 120V AC, 5W/ft GFCI plug. |
Higher output for larger wastewater lines. | |
| Condensate, gray-water and small drains. | Non-potable, low-pressure drains under 2 in. | 120V AC, approx. 3W/ft 6 ft lead. |
Compact, lower-output option for small drains. |
Before ordering: confirm fluid, pressure, inside diameter and heated length. Fixed-length cable cannot be cut.
2. On-pipe heating cables
Mounted outside accessible pipes.
| Product | Best for | Installation | Power & heat | Why choose it |
|---|---|---|---|---|
| At-a-glance power and heating status. | Straight trace, spiral wrap or approved overlap. | 120V; 5W/ft at 50°F 3 ft lead. |
|
|
| Automatic residential protection. | Straight trace, spiral wrap or approved overlap. | 120V; 5W/ft at 50°F 3 ft lead. |
Built-in thermostat: on below approx. 37°F; off near 50°F. | |
| Applications that need heating to start as soon as power is connected. | Straight trace, spiral or approved overlap. Tape included. | 120V; 5W/ft at 50°F 6 ft lead. |
No built-in thermostat; heats whenever powered. | |
| Long, irregular or multiple pipe runs. | Field-assembled with power connection and end seal. | 120V; 5W/ft 100, 300 or 500 ft reels. |
Cut to each run; max. 120 ft per circuit. | |
| RVs, boats and off-grid systems. | Cut and reseal with the included waterproof end seal. | 12V DC; approx. 5W/ft 3 ft lead. |
|
Quick guide: Dual Indicators: power/heat status · Blue: automatic · Green: external control · Bulk: custom 120V · 12V: mobile/off-grid.
3. Fittings & adapters
For in-pipe cable connections.
Stainless Steel Hose Barb Fitting
Connects compatible flexible hose to a threaded pipe entry.
View product →
316 Stainless Steel Pipe Adapter
Reduces a larger NPT connection to the cable entry size.
View product →







